Isuzu 1999 RODEO Workshop Manual page 48

1A–20 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
5. Separate the upper case and slit the lining parting
face with a knife.
6. Pull out the mode door while raising up the catch of
door lever.
7. Remove sub-lever.
8. Remove door lever.
Installation
To install, follow the removal steps in the reverse order,
noting the following points:
1. Apply grease to the door lever and to the abrasive
surface of the upper case.
2. Apply an adhesive to the parting face of the lining
when assembling the upper case.
873RS002