Isuzu 1999 RODEO Workshop Manual page 478

5. Apply special grease (approximately 1 g) to the piston
and attach the dust boot to the piston and caliper.
Insert the dust boot ring into the dust boot.
6. Install guide bolt and lock bolt dust boot.
7. Install the dust boot on the support bracket after
applying special grease (approximately 1 g) onto the
dust boot inner surface. Apply special grease onto the
lock bolt and guide bolt setting hole of the support
bracket.
8. Install lock bolt and guide bolt and tighten the bolt to
the specified torque.
Torque: 74 N·m (54 lb ft)
POWER–ASSISTED BRAKE SYSTEM
302RS020
302RS021
5C–41