Isuzu 1999 RODEO Workshop Manual page 370

25. Install ball bearing (17), using a bench press.
26. Select a snap ring (16) that will allow the minimum
axial play.
Clearance : 0–0.1 mm (0–0.004 in)
Snap ring availability:
Snap ring thickness
1.55 mm (0.061 in)
1.60 mm (0.063 in)
1.65 mm (0.065 in)
1.70 mm (0.067 in)
1.75 mm (0.069 in)
1.80 mm (0.071 in)
1.85 mm (0.073 in)
1.90 mm (0.075 in)
Color coding
White
Yellow
Blue
Pink
Green
Brown
Red
Orange
262RS015
226RS021
TRANSFER CASE
27. Use a pair of snap ring pliers to install the snap ring
(16) to the output shaft (31).
Sub-gear (anti-lash plate) preload
1. Hook a length of piano wire (52) over one of the
sub–gear (53) teeth.
2. Attach the other end of the piano wire to (52) a
spring balancer.
3. Measure the sub–gear preload.
Preload: 59–98 N (13–22 lb)
28. Install front output gear assembly (15) to transfer
case (42).
29. Use a pair of snap ring pliers to install the snap ring
(14) to the transfer case (42).
NOTE: The snap ring must be fully inserted into the
transfer case snap ring groove.
30. Use a bench press to install the ball bearing (12) to the
input shaft (13). (A/T)
4D–35
226RW156
265RS003