Isuzu 1999 RODEO Workshop Manual page 366

Front Output Shaft Oil Seal Replacement
1. Remove the oil seal from the transfer case.
2. Apply engine oil to the oil seal outer surfaces.
3. Apply recommended grease (BESCO L2) or
equivalent to the oil seal lip.
4. Use the oil seal installer J–38594 to install the oil seal
to the transfer case.
Legend
(50) Front Output Shaft Oil Seal
1. Install the transfer case (with oil seal) (42), performing
the following steps. (M/T)
f Cover the shaft splines with adhesive tape (43).
This will prevent damage to the oil seal lip (44).
Legend
(43) Adhesive Tape
(44) Oil Seal Lip
(45) Oil Seal Collar
(46) Bearing
f Apply recommended liquid gasket (LOCTITE FMD
127) or its equivalent to the transmission,
intermediate plate and transfer case fitting surfaces
(M/T).
220RW070
TRANSFER CASE 4D–31
A07RW022
220RS026