Isuzu 1999 RODEO Workshop Manual page 344

2. Install transfer case (10) to the transmission. Tighten
transfer bolts as shown in the figure.
3. Remove the transmission jack from transmission
side.
4. Connect harness connectors and clip.
Connector: transfer switch, 2WD–4WD actuator,
speed sensor.
5. Install rear propeller shaft (8) and front propeller shaft
(9).
Torque: 63 N·m (46 lb ft)
6. Install transfer protector (6) and fairing plate (7).
TRANSFER CASE 4D–9
261RW001
150RW006