4D–4
TRANSFER CASE
Transfer Rear Oil Seal and Associated Parts
Legend
(1) Rear Propeller Shaft
Removal
1. Disconnect the rear propeller shaft (1) from the
transfer case side.
2. Remove end nut and rear companion flange (2),
using the companion flange holder J–8614–11.
3. Use the universal puller to remove the rear
companion flange and O–ring.
4. Remove the oil seal from the transfer case.
Transfer Rear Oil Seal
(2) End Nut and Rear Companion Flange
(3) Oil Seal
Installation
1. Install oil seal and apply engine oil to the oil seal outer
2. Apply the recommended grease (BESCO L2) or
3. Use the oil seal installer J–39208 to install the rear
266RW001
surfaces.
equivalent to the oil seal lip.
seal (3) to the transfer rear case.
220RS015
220RS016