Front Hub And Disc (4Wd Model); Disassembled View; Disassembly - Isuzu 1999 RODEO Workshop Manual

4C–8
DRIVE SHAFT SYSTEM

Disassembled View

Legend
(1) Bolt
(2) Cap
(3) Snap Ring and Shim
(4) Hub Flange
(5) Lock Washer and Lock Screw
(6) Hub Nut

Disassembly

1. Before disassembly, select the 2WD position with the
4WD switch.
2. Jack up the front of vehicle and support frame with
jack stands.

Front Hub and Disc (4WD Model)

(7) Outer Bearing
(8) Bolt
(9) Hub and Disc Assembly
(10) Wheel Pin
(11) ABS Sensor Ring
(12) Inner Bearing
(13) Oil Seal
3. Remove the disc brake caliper assembly and hang it
on the frame with wires. Refer to Disk Brakes in Brake
section.
4. Remove Bolt.
5. Remove cap.
6. Remove snap ring and shim.
7. Remove hub flange.
411RW001