Disassembled View
Legend
(1) Bolt
(2) Cap
(3) Snap Ring and Shim
(4) Hub Flange
(5) Lock Washer and Lock Screw
(6) Hub Nut
Disassembly
1. Before disassembly, select the 2WD position with the
4WD switch
2. Jack up the front of vehicle and support frame with
jack stands.
Front Hub and Disc
(7) Outer Bearing
(8) Bolt
(9) Hub and Disc Assembly
(10) Wheel Pin
(11) ABS Sensor Ring
(12) Inner Bearing
(13) Oil Seal
3. Remove the disc brake caliper assembly and hang it
on the frame with wires. Refer to Disk Brakes in Brake
section.
4. Remove bolt.
5. Remove cap.
6. Remove snap ring and shim.
7. Remove hub flange.
DRIVE SHAFT SYSTEM
4C–3
411RW001