Isuzu 1999 RODEO Workshop Manual page 242

3. Install oil seal. Note direction.
4. Install bearing assembly, using installer and press.
NOTE: Install bearing with cup towards inboard side.
5. Install retainer ring, using installer and press.
6. Install snap ring.
420RS030
7. Install axle shaft assembly into housing.
8. Install bolts, lockwashers, and nuts.
Tighten the retainer nuts to the specified torque.
Torque : 75 N·m (55 lb ft)
420RS031
DIFFERENTIAL (REAR) 4A2–9
420RS033