Isuzu 1999 RODEO Workshop Manual page 239

DIFFERNTIAL (REAR)
4A2–6
9. Loosen the brake tube flare nut, remove the clip and
take out the brake tube.
10. Remove the shock absorber.
11. Remove the stabilizer linkage mounting bolts and
nuts (2) from the frame side.
12. Remove the lateral rod fixing bolt and nut from the
frame.
13. Remove the upper link mounting bolt and nut (3) from
the axle housing.
350RW020
14. Remove the lower link fixing bolt and nut (4) from the
axle housing.
350RW024
15. Jack down and remove the coil spring and insulator.
16. Axle housing assembly can be separated from the
vehicle on completion of steps 1 – 15.
17. Remove the brake caliper fixing bolt, loosen the flare
nut, release the clip and take out the brake caliper
together with the flexible hose.
18. Remove brake disc.
19. Remove antilock brake system speed sensor fixing
bolt and the clip and bracket on the axle housing.
20. Remove the brake pipe clip and fixing bolt on the axle
housing and take out the brake pipe.
460RW015
460RW016