Isuzu 1999 RODEO Workshop Manual page 142

2A–40 POWER–ASSISTED STEERING SYSTEM
7. Loosen the inflator module fixing bolt from behind the
steering wheel assembly using a TORX
equivalent until the inflator module can be released
from steering assembly.
8. Disconnect the yellow 2-way SRS connector and
horn lead located behind the inflator module.
9. Apply a setting mark (1) across the steering wheel
driver or and shaft so parts can be reassembled in their original
position.
10. Move the front wheels to the straight ahead position,
827RW070
then use steering wheel remover J–29752 to remove
the steering wheel.
CAUTION: Never apply force to the steering wheel
in direction of the shaft by using a hammer or other
impact tools in an attempt to remove the steering
wheel. The steering shaft is designed as an energy
absorbing unit.
827RW073
430RW021
430RX005