Front Drive Shaft Joint; Front Drive Shaft Joints Replacement - Isuzu 2000 Trooper Workshop Manual

4C–18
DRIVE SHAFT SYSTEM
Front Drive Shaft Joints Replace-
ment
D Refer to Front Drive Axle Assembly Replacement in
this section, and refer to Front Hub and Disc in
Suspension section.
Front Hub Bearing Preload Check
Check the hub bearing preload at the wheel pin.
New bearing and new oil seal:
19.6 – 24.5 N (4.4 – 5.5 lb)
Used bearing and new oil seal:
11.8– 17.7 N (2.6 – 4.0 lb)
Inspection Of Shift On The Fly System
Gear Oil

Front Drive Shaft Joint

1. Open filler plug and make sure that the oil is up to the
2. Tighten the filler plug to specified torque.
411RS001
412RT002
plug port.
If the level oil is low, replenish with gear oil GL–5
grade.
Torque: 78 N·m (58 lb in)