Mazda RX-8 Workshop Manual page 1976

necessary to inspect the monitored value of the input device related to the output device
control. Since an output device malfunction is not directly indicated as a malfunction of the
monitored value for the output device, it is necessary to inspect the output device
individually using the simulation function.
PID/DATA MONITOR AND RECORD function table
Monitor item
Unit/Condition
(Definition)
BOO TCM
On/Off
(Brake switch)
DTCCNT N/A
DWN SW
On/Off
(Down switch)
ECT TCM
°C, °F
(ECT)
FDPDTC
N/A
(FREEZE
FRAME DATA)
GEAR_RA
N/A
Condition/Specification
Brake pedal
depressed:
On
Other: Off
Indicates number of DTC
Down shift
at M range:
On
Other: Off
Indicates ECT
Indicates code of FREEZE
FRAME DATA
1GR: 3.538
2GR: 2.060
3GR: 1.404
4GR: 1.000
Action
Inspect the brake switch.
(See BRAKE SWITCH
Check DTC.
(See DTC TABLE [SJ6A-EL].)
Inspect the selector lever component.
(See SELECTOR LEVER COMPONENT
INSPECTION.)
Inspect the ECT sensor.
(See ENGINE COOLANT
TEMPERATURE (ECT)
SENSOR INSPECTION
[13B-MSP].)
Inspect the PCM.
(See PCM INSPECTION
[13B-MSP].)
N/A
Inspect following PIDs: OSS, SSA, SSB,
SSC, SSD, SSE SSF, SSG, THOP, TSS,
VSS
terminal
INSPECTION.)
TCM
N/A
N/A
2F
N/A
N/A
N/A