Mazda RX-8 Workshop Manual page 1975

< Previous Next >
2011 - RX-8 - Transmission/Transaxle
PID/DATA MONITOR INSPECTION [SJ6A-EL]
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
When using the IDS (laptop PC)
When using the PDS (Pocket PC)
3. Select the PID from the PID table
4. Verify the PID data according to the directions on the M-MDS screen.
NOTE:
Perform part inspection for the output device after TCM inspection.
The PID/DATA MONITOR function monitors the calculated value of the input/output signals
in the TCM. Therefore, if a monitored value of an output device is out of specification, it is
Select "DataLogger".
Select "Modules".
Select "TCM".
Select "Module Tests".
Select "TCM".
Select "DataLogger".