Dtc B1627 - Mazda 6 2002 Workshop Manual

ON-BOARD DIAGNOSTIC (DYNAMIC STABILITY CONTROL)

DTC B1627

Caution
• • • • When attaching the tester lead to the DSC HU/CM connector the SST (49 G066 004) must be used.
DTC B1627
DETECTION • Reverse signal is input for 10 seconds or more while driving at a vehicle speed of
CONDITION 65 km/h {40.3 mph}.
POSSIBLE • Short to power circuit in harness between DSC HU/CM terminal Z and back-up light switch (MTX)
CAUSE • Malfunction of TR switch (ATX) or back-up light switch (MTX)
P–76
Reverse signal
A6E697367650W06