Front Door Speaker Removal/Installation; Front Door Speaker Inspection - Mazda 6 2002 Workshop Manual

FRONT DOOR SPEAKER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the front door trim.
3. Remove in the order indicated in the table.
1 Screw
2 Connector
3 Front door speaker
(See T–101 Front Door Speaker Installation
4. Install in the reverse order of removal.
Front Door Speaker Installation Note
1. Attach the speaker with the wiring harness placed
in the groove of the door unit panel.
Caution
• • • • If the speaker is attached with the
harness placed outside of the groove, the
wiring harness might be broken.
End Of Sie

FRONT DOOR SPEAKER INSPECTION

1. Inspect for resistance between the front door
speaker terminals using an ohmmeter.
• If not as specified, replace the front door
speaker.
2. To verify that the front door speaker outputs sound, apply voltage to the front door speaker and release using a
1.5-V battery.
• If not outputs sound, replace the front door speaker.
End Of Sie
AUDIO AND NAVIGATION SYSTEM
Note)
A6E8124W032
A6E812466960W01
A6E8124W001
T
A6E8124W002
A6E812466960W02
A6E8124W040
T–101