Quarter Window Glass Removal/Installation - Mazda 6 2002 Workshop Manual

9. Verify that the gap of the A pillar part as shown
the figure.
10. Keeping the measurement of the molding lip gap
within specification, press completely along the
perimeter of the glass.
11. Install the seaming welt.
12. Install the cowl grille.
13. Install the headliner
14. Install the interior light. (See
LIGHT REMOVAL/INSTALLATION.)
15. Allow the sealant to harden completely.
Sealant hardening time: 24 hours
End Of Sie

QUARTER WINDOW GLASS REMOVAL/INSTALLATION

1. Remove the rear door trim.
2. Remove the screw and bolt, then remove the
glass guide.
3. Remove the quarter window and the molding
together in one piece.
4. Remove the molding from the glass.
5. Install in the reverse order of removal.
End Of Sie
WINDOW GLASS
T–48 FRONT MAP
A6E7738W003
A6E7738W004
A6E773862580W01
S
A6E7738W024
S–67