Mazda 6 2002 Workshop Manual page 547

Hide thumbs Also See for 6 2002:

Table of Contents

ENGINE SPEED SENSING POWER STEERING

Upper Bearing, Oil Seal Disassembly Note

1. Set the SST as shown.

2. Using a press, remove the oil seal and upper

bearing without applying pressure to the edge of

the valve housing.

Holder Disassembly Note

1. Cut away the staked area by using a drill.

• • • • Carefully pull out the holder without

damaging the U gasket.

2. Disassemble the holder.

Oil Seal, Inner Guide Disassembly Note

1. Set the SSTs into the valve side.

2. Install the SST to the gear housing.

3. Press out the oil seal and inner guide.

Mounting Rubber Disassembly Note

• Press the mounting rubber out from the gear

housing using the SSTs and a press.

Chapters

Table of Contents