FRONT STABILIZER REMOVAL/INSTALLATION
1. Remove the front crossmember component. (See
INSTALLATION.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
4. Adjust the headlight zeroset.
(See
T31 HEADLIGHT
5. Inspect the front wheel alignment.
(See
R5 FRONT WHEEL
.
1
Stabilizer control link
2
Stabilizer bracket
(See
R22 Stabilizer Bracket Installation
3
Stabilizer bushing
4
Front stabilizer
Stabilizer Bracket Installation Note
1. Apply rubber grease to the inside surface of the stabilizer bushing.
2. Align the bushing with the inside of positioning plate on the stabilizer bar.
3. Install the stabilizer bracket.
End Of Sie
R22
FRONT SUSPENSION
ZEROSET.)
ALIGNMENT.)
Note)
R23 FRONT CROSSMEMBER REMOVAL/
A6E7414W020
A6E7414W015