Mazda 6 2002 Workshop Manual page 881

Discharge type
Caution
• • • • Incorrect servicing of the discharge headlights could result in electrical shock. Before servicing
the discharge headlights, always refer to the “Discharge headlight service warnings.” (See
DISCHARGE HEADLIGHT SERVICE
1. Disconnect the negative battery cable.
2. Disconnect the front combination light. (See
INSTALLATION)
3. Remove in the order indicated in the table.
1 Cover
2 Connector
3 Bulb cover
4 Discharge headlight bulb
Caution
• • • • A bulb generates etremely high heat
when it is used. If the surface of the bulb
is soiled, ecessive heat will build up and
the light's life will be shortened. When
replacing the bulb, hold the metal flange,
not the glass.
4. Install in the reverse order of removal.
High-beam
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
1 Cover
2 Connector
3 Headlight bulb (See
note)
Caution
• • • • A halogen bulb generates etremely high
heat when it is used. If the surface of the
bulb is soiled, ecessive heat will build
up and the light's life will be shortened.
When replacing the bulb, hold the metal
flange, not the glass.
3. Install in the reverse order of removal.
Headlight bulb removal note
1. Release the bulb pressing wire to remove the headlight bulb.
End Of Sie
EXTERIOR LIGHTING SYSTEM
WARNINGS)
T–26 FRONT COMBINATION LIGHT REMOVAL/
T–28 Headlight bulb removal
T–25
A6E8112W106
T
A6E8112W107
T–29