Mazda 6 2002 Workshop Manual page 686

6. If attaching 2 balance weights, position them so
that each is on either side of the position indicated
by the wheel balancer.
Caution
• • • • Do not attach weight balances in a row.
• • • • Do not overlap the balance weights.
• • • • Total weight must not eceed 160g
{5.65 oz}.
Knock-type Balance Weight (Inner)
1. Measure the amount of unbalance with a wheel balancer.
2. Attach a balance weight corresponding to the
measured weight value on the position (inner)
indicated by the wheel balancer.
Caution
• • • • Do not attach 3 or more balance weights.
• • • • One balance weight must not eceed 60g
{2.12 oz}, and a total of 2 balance weights
must not eceed 100g {3.53 oz}.
Remaining Amount of Unbalance Confirmation
1. After installing the outer and inner balance weights, operate the wheel balancer again.
2. Confirm that the remaining unbalance does not eceed followings on either side.
16 inch wheel 10 g {0.35 oz}
17 inch wheel 9 g {0.32 oz}
• If the remaining unbalance eceeds 10 g {0.35 oz} (16 inch wheel) or 9g {0.32 oz} (17 inch wheel), perform
wheel balance adjustment again.
Allowable remaining unbalance value (g)
Dynamic unbalance (at rim)
Outer
16 inch 10 g {0.35 oz}
wheel ma.
17 inch 9 g {0.32 oz}
wheel ma.
End Of Sie
R–8
WHEEL AND TIRE
Outer Inner
8 g {0.28 oz}
7 g {0.25 oz}
Static
unbalance
Inner
(at rim)
8 g {0.28 oz} 13 g {0.46 oz}
ma. ma.
7 g {0.25 oz} 11 g {0.39 oz}
ma. ma.
Z5U0212W102
Z5U0212W103