Transaxle Range (Tr) Switch Adjustment - Mazda 6 2002 Workshop Manual

Hide thumbs Also See for 6 2002:
Table of Contents

Advertisement

20. Connect the selector cable.
21. Inspect for continuity at the TR switch. (See
TRANSAXLE RANGE (TR) SWITCH
INSPECTION.)
• If not as specified, readjust the TR switch.
(See
K–18 TRANSAXLE RANGE (TR)
SWITCH
ADJUSTMENT.)
22. Connect the TR switch connector.
23. Install the aircleaner component. (See
INTAKE-AIR SYSTEM REMOVAL/
INSTALLATION.)
24. Connect the negative battery cable.
25. Inspect operation of the TR switch. (See
TRANSAXLE RANGE (TR) SWITCH
INSPECTION.)
• If not as specified, readjust the TR switch. (See
ADJUSTMENT.)
End Of Sie

TRANSAXLE RANGE (TR) SWITCH ADJUSTMENT

1. Disconnect the negative battery cable.
2. Remove the air cleaner component. (See
Caution
• • • • Water or foreign objects entering the connector can cause a poor connection or corrosion. Be
sure not to drop water or foreign objects on the connector when disconnecting it.
3. Remove the clip and disconnect the selector
cable.
4. Rotate the manual shaft to the converter housing
side fully, then return 2 notches to set the N
position.
5. Disconnect the TR switch connector.
K–18
AUTOMATIC TRANSAXLE
K–14
F–10
K–14
K–18 TRANSAXLE RANGE (TR) SWITCH
F–10 INTAKE-AIR SYSTEM
REMOVAL/INSTALLATION.)
A6E5614W019
A6E561419440W03
A6E5614W011
A6E5614W013
A6E5614W008

Advertisement

Table of Contents
loading

This manual is also suitable for:

6

Table of Contents