Air Bag Module And Pre-Tensioner Seat Belt - Mazda 6 2002 Workshop Manual

4. Tie the passenger-side air bag module to the tire
with the module facing the center of the tire. Wrap
the wire harness through the tire and around the
bolts at least four times.
Warning
• • • • If the air bag module ia not properly
installed to the tire, serious injury may
occur when the module is deployed,
When installing the air bag module to the
tire, make sure the module is facing the
center of the tire.
5. Stack the tire with the passenger-side air bag
module on top of two tires. Stack another tire that
has a wheel on top of the four tires.
6. Tie all tires together with wire.
7. Connect the SST (Deployment tool) to the SST
(Adapter harness).
8. Connect the red clip of the SST (Deployment tool)
to the positive battery terminal and the black clip
to the negative battery terminal.
9. Verify that the red light on the SST (Deployment
tool) is illuminated.
10. Make sure all persons are standing at least 6 m
{20 ft} away from the vehicle.
11. Press the activation switch on the SST
(Deployment tool) to deploy the passenger-side
air bag module.
12. Disconnect the SST (Deployment tool) from the
SST (Adapter harness).
13. Connect the SST (Deployment tool) to the SST
(Adapter harness).
14. Perform steps 8 through 11, in order to deploy the
passenger-side air bag module.
T–134
AIR BAG SYSTEM
A6E8130W036
A6E8130W037
A6E8130W034
A6E8130W038
A6E8130W028