Drive Plate Removal/Installation - Mazda 6 2002 Workshop Manual

4. Squeeze the header tabs down in order as shown
against the lip of radiator outer tank base with
locking-type pliers while rotating the pliers toward
the tank.
5. Verify the height of the header tabs is same as
the height before removal.
6. Inspect for leakage from radiator. (See
ENGINE COOLANT LEAKAGE
End Of Sie

DRIVE PLATE REMOVAL/INSTALLATION

1. Remove the transale.(See
2. Remove in the order indicated in the figure.
3. Install in the reverse order of removal.
.
1 Drive plate mounting bolts
(See K–44 Drive Plate Mounting Bolts Removal
Note.)
2 Adapter
3 Drive plate
(See K–44 Drive Plate Installation
AUTOMATIC TRANSAXLE
E–4
INSPECTION.)
K–29 AUTOMATIC TRANSAXLE
Note.)
REMOVAL/INSTALLATION.)
K
A6E5614W076
A6E5614W073
A6E561419020W01
A6E5614W078
K–43