Mazda 6 2002 Workshop Manual page 575

Hide thumbs Also See for 6 2002:

Table of Contents

Inspection and repair procedure

Lateral runout inspection

1. To secure the disc plate and the hub, tighten the hub nuts upside down or insert a washer (thickness 10 mm

{0.39 in}, inner diameter more than 12 mm {0.47 in}) between the hub bolt and the hub nut.

• The component parts of the SST (49 B017 001 or 49 G019 003) can be used as a suitable washer.

2. After tightening all the hub nuts to the same torque, put the dial gauge on the friction surface of disc plate 10

mm {0.39 in} from the disc plate edge.

3. Rotate the disc plate one time and measure the runout.

Runout limit

0.05 mm {0.002 in}

CONVENTIONAL BRAKE SYSTEM

Chapters

Table of Contents