Mazda 6 2002 Workshop Manual page 600

Hide thumbs Also See for 6 2002:

Table of Contents

COMBINE SENSOR INSPECTION

• • • • Be careful and do not allow the lateral-G sensor to fall. If by chance it is subjected to strong

impact, replace it.

1. Connect the connector.

2. Turn ignition switch on, verify the voltage between

terminals B and E under the following conditions.

• If not within the specification, replace the

lateral-G sensor.

(1) Lateral-G

1) Horizontal

2) Facing up (inclined 90° from horizontal)

3) Facing down (declined 90° from

(2) Yaw rate

1) Measure yaw rate sensor voltage under

static condition.

DYNAMIC STABILITY CONTROL

A6E692067650W06

Chapters

Table of Contents