Mazda 6 2002 Workshop Manual page 987

Hide thumbs Also See for 6 2002:

Table of Contents

Side air bag module

1. Remove the side air bag module. (See

2. Connect the SST (Adapter harness) to the side

air bag module as shown in the figure.

3. Tie the side air bag module to the tire with the

module facing the center of the tire. Wrap the wire

harness through the tire and around the bracket

at least four times.

• • • • If the air bag module is not properly

installed to the tire, serious injury may

occur when the module is deployed.

When installing the air bag module to the

tire, make sure the module is facing the

center of the tire.

4. Stack the tire with the side air bag module on top

of two tires. Stack a tire on top of three tires.

Stack another tire that has a wheel on top of the

5. Tie all tires together with wire.

AIR BAG SYSTEM

T–121 SIDE AIR BAG MODULE

REMOVAL/INSTALLATION.)

Chapters

Table of Contents