Mazda 6 2002 Workshop Manual page 919

Terminal Signal
Rear wiper
G Rear wiper switch
switch INT
I IG 2 R. WIP 10 A fuse
End Of Sie
WIPER AND WASHER SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the column cover. (See
3. Remove in the order indicated in the table.
1 Connector
2 Screw
3 Wiper and washer switch
4. Install in the reverse order of removal.
End Of Sie
WIPER AND WASHER
Connected to Test condition
Ignition switch at
ON position
Ignition switch at ON position
Other
S–84 COLUMN COVER
Voltage (V)/
Continuity
Rear wiper
switch at INT 0
position
• Rear wiper
switch at
OFF position
B+
• Rear wiper
switch at ON
position
B+
0
REMOVAL/INSTALLATION)
Action
• Inspect R. WIP 10 A
fuse
• Inspect wiper and
washer switch (See T–
68 WIPER AND
WASHER SWITCH
INSPECTION)
• Inspect related harness
• Inspect R. WIP 10 A
fuse
• Inspect related harness
A6E811666122W01
A6E8116W203
A6E8116W204
T–67
T