Mazda 6 2002 Workshop Manual page 981

4. Connect the SST (Deployment tool) to the SST
(Adapter harness).
5. Connect the red clip of the SST (Deployment tool)
to the positive battery terminal and the black clip
to the negative battery terminal.
6. Verify that the red light on the SST (Deployment
tool) is illuminated.
7. Make sure all persons are standing at least 6 m
{20 ft} away from the vehicle.
8. Press the activation switch on the SST
(Deployment tool) to deploy the passenger-side
air bag module.
9. Disconnect the SST (Deployment tool) from the
SST (Adapter harness).
10. Connect the SST (Deployment tool) to the SST
(Adapter harness).
11. Perform steps 5 through 8, in order to deploy the
passenger-side air bag module.
Side air bag module
1. Disconnect the side air bag module connector.
2. Connect the SST (Adapter harness) to the side
air bag module.
3. Connect the SST (Deployment tool) to the SST
(Adapter harness).
4. Connect the red clip of the SST (Deployment tool)
to the positive battery terminal and the black clip
to the negative battery terminal.
5. Verify that the red light on the SST (Deployment
tool) is illuminated.
6. Make sure all persons are standing at least 6 m
{20 ft} from the vehicle.
AIR BAG SYSTEM
A6E8130W050
A6E8130W028
T
A6E8130W029
A6E8130W027
T–129