Intruder Sensor Removal/Installation; Theft-Deterrent Siren Removal/Installation - Mazda 6 2002 Workshop Manual

INTRUDER SENSOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the headliner.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
.
1 Connector
2 Screw
End Of Sie

THEFT-DETERRENT SIREN REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the left side trunk side trim.
3. Remove in the order indicated in the table.
1 Nut
2 Connector
3 theft-deterrent siren
4. Install in the reverse order of removal.
End Of Sie
THEFT-DETERRENT SYSTEM
3 Intruder sensor
A6E812000172W01
T
A6E8120W005
A6E812000173W01
A6E8120W006
T–89