Mazda 6 2002 Workshop Manual page 1120

AIR INTAKE ACTUATOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the glove compartment.
3. Remove the car navigation unit. (See
4. Remove in the order indicated in the table.
1 Air intake actuator connector
2 Air intake actuator
5. Install in the reverse order of removal.
End Of Sie
AIR INTAKE ACTUATOR INSPECTION
1. Connect battery positive voltage to terminal D or F and ground to terminal F or D of the air intake actuator.
2. Verify that the air intake actuator operates as shown below.
• If not as specified, replace the air intake actuator.
Connection
B+ GND
D F
F D
U–30
CONTROL SYSTEM
CONTROL SYSTEM
T–98 CAR-NAVIGATION UNIT
Movement
RECIRCULATE→FRESH
FRESH→RECIRCULATE
REMOVAL/INSTALLATION.)
A6E854061060W01
A6E8540W001
A6E854061060W02
A6E8540W002
A6E8540W003