Oil Cooler Disassembly/Assembly - Mazda 6 2002 Workshop Manual

2. Align the marks, and slide the oil hose onto the oil
pipe until it is fully seated as shown.
Note
• If reusing the hose, install the new hose
clamp eactly on the mark left by the
previous hose camp.Then apply force to the
hose clamp in the direction of the arrow in
order to fit the clamp in the place.
3. Install the new hose clamp onto the hose.
4. Verify that the hose clamp does not interfere with
any other components.
End Of Sie

OIL COOLER DISASSEMBLY/ASSEMBLY

1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
.
1 Mount rubber
2 Radiator outer tank (in tank oil cooler)
(See K–42 Radiator Outer Tank (In Tank Oil Cooler)
Removal Note.)
(See K–42 Radiator Outer Tank (In Tank Oil Cooler)
Installation Note.)
3 O-ring
4 Washer
AUTOMATIC TRANSAXLE
5
6
7
Drain plug
ATF cooler
Radiator
A6E5614W071
A6E561419900W03
K
A6E5614W072
K–41