Mazda 6 2002 Workshop Manual page 944

Enabling/Disabling Key Reprograming Without Using SST (WDS or Equivalent)
Note
• With this function, the need for use of the SST (WDS or equivalent) to perform key registration when
following the "When the customer has two or more valid keys" procedure can be optionally inhibited or
prohibited. This function is provided to prohibit drivers from performing the reprogram procedure on
vehicles owned by rental car companies or other large vehicle fleet owners.
1. Connect the SST (WDS or equivalent).
2. Using valid or new key, turn ignition switch to ON position.
3. Perform security access approval. (See
4. Select "Customer Spare Key Programming Enable/Disable".
• Enable: Key registration can be performed without using the SST (WDS or equivalent).
• Disable: Key registration can only be performed using the SST (WDS or equivalent).
Note
• At the time of new vehicle delivery, the function is set on "Enable".
Security Access Procedure
Note
• When using a SST (WDS or equivalent) or equivalent to perform "Ignition Key Code Erase" or "Customer
Spare Key Programming Enable/Disable", it is necessary to obtain security access approval.
1. Connect the SST (WDS or equivalent).
2. Select "Tool bo", "Body", "Security", and then "PATS Functions" (in this order).
3. The SST (WDS or equivalent). will read out an outcode depending on the designated procedure.
4. Access the Mazda official website to obtain the incode that corresponds to the outcode. Refer to Service
Information Ref. No. A001/02 for details of this procedure.
5. Input the incode to the SST (WDS or equivalent).
End Of Sie
T–92
IMMOBILIZER SYSTEM
T–92 Security Access Procedure.)