Mazda 6 2002 Workshop Manual page 917

REAR WASHER HOSE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the washer tank. (See
3. Partially peel off the right side mud guard.
4. Remove rear washer hose No.1 from the clips.
5. Remove rear washer hose No.1 and joint pipe A.
6. Remove the A-pillar trim. (See
TRIM REMOVAL)
7. Remove rear washer hose No.2 from clip A.
8. Remove clips B from the body.
9. Remove rear washer hose No.2 and joint pipes B.
10. Remove the C-pillar trim. (See
TRIM REMOVAL/INSTALLATION)
11. Remove the liftgate upper trim. (See
LIFTGATE UPPER TRIM REMOVAL/
INSTALLATION)
12. Remove rear washer hose No.3 from clip C.
13. Remove clips D from the body.
14. Remove rear washer hose No.3 and joint pipe C.
15. Remove the headliner. (See
REMOVAL/INSTALLATION)
16. Remove the tape from rear washer hose No.4.
17. Install in the reverse order of removal.
End Of Sie
WIPER AND WASHER
T–58 WASHER TANK
S–87 A-PILLAR
S–89 C-PILLAR
S–94
S–96 HEADLINER
REMOVAL/INSTALLATION)
A6E811667470W01
A6E8116W148
T
A6E8116W149
A6E8116W201
A6E8116W202
T–65