Ignition Key Illumination Bulb Removal/Installation; Glove Compartment Light Bulb Removal/Installation; Panel Light Control Switch Removal/Installation - Mazda 6 2002 Workshop Manual

IGNITION KEY ILLUMINATION BULB REMOVAL/INSTALLATION

End Of Sie
1. Disconnect the negative battery cable.
2. Remove the column cover. (See
3. Remove the ignition key illumination bulb.
4. Install in the reverse order of removal.
End Of Sie

GLOVE COMPARTMENT LIGHT BULB REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
1 Socket
2 Glove compartment light bulb
3. Install in the reverse order of removal.
End Of Sie

PANEL LIGHT CONTROL SWITCH REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
1 Panel light control switch (See
Control Switch Removal
2 Connector
3. Install in the reverse order of removal.
Panel Light Control Switch Removal Note
1. Insert your hand from the lower side of the dashboard and squeeze the tabs of the panel light control switch.
2. Pull the panel light control switch forward to remove it.
End Of Sie
INTERIOR LIGHTING SYSTEM
S–84 COLUMN COVER
T–53 Panel Light
Note)
REMOVAL/INSTALLATION)
A6E811460231W01
A6E8114W129
A6E811451445W01
T
A6E8114W113
A6E811466600W01
A6E8114W116
T–53