Rear Window Glass Removal - Mazda 6 2002 Workshop Manual

Hide thumbs Also See for 6 2002:

Table of Contents

REAR WINDOW GLASS REMOVAL

1. For the 4SD, remove the following parts:

(1) Remove the headliner.

(2) Remove the rear package trim.

2. For the 5HB, remove the following parts.

(1) Remove the rear wiper arm and blade.

(2) Remove the liftgate lower trim.

3. Apply protective tape along the edge of the body to protect it from damage.

4. Cut the lip of the rear window molding using a

• • • • Using a razor with bare hands can cause

injury. Always wear gloves when using a

• The rear window molding is a replacement

Not Reusing Glass

• For the areas of the sealant that are difficult to cut, use a SST (piano wire) and follow the procedure under

“Reusing Glass.”

1. Use a SST, and insert the blade into the sealant.

2. Pull through the sealant around the edge of the

3. Remove the glass.

WINDOW GLASS

A6E773863931W01

Table of Contents