Seat Belt Inspection - Mazda 6 2002 Workshop Manual

SEAT BELT INSPECTION

Belt
1. Confirm that the seat belt is installed correctly.
2. Inspect the seat belt for damage and deformation of metal parts.
• If any damage is found, replace as necessary.
ELR
1. Verify that the belt can be pulled out smoothly,
and that it moves smoothly when wound.
• If not as specified, replace the seat belt.
2. Verify that the retractor locks when the belt is
quickly pulled.
• If not as specified, replace the seat belt.
3. Remove the retractor.
4. Make sure that the seat belt does not lock when
the retractor is tilted slowly up to 15° ° ° ° from the
mounted position and locks when the retractor is
tilted 40° ° ° ° or more.
• If not as specified, replace the seat belt.
ALR
1. Pull the belt out fully and the lock mode changes from ELR to ALR.
2. Verify that retractor makes a clicking sound as the belt slowly retracts. If no sound is heard, the lock mode has
not changed to ALR. If necessary, repeat the above Step 1.
• If not as specified, replace the seat belt.
3. Verify that the belt locks when pulled.
• If not as specified, replace the seat belt.
4. Verify that the lock mode changes to ELR when the belt fully retracts.
• If not as specified, replace the seat belt.
Load Limiter Retractor
Warning
• • • • When the load limiter operates, the belt and anchor rub against each other strongly leaving a trace
of wear. If the seat belt is used in this state, the seat belt will not function to its designed effect and
there is the possibility of serious injury to passengers. Be sure to replace the seat belt once the
load limiter operates.
1. If the vehicle has been subjected to a shock in an
accident, pull the belt from the retractor and
confirm that there is no trace of wear (the load
limiter has not operated) by visually inspecting
and feeling the belt.
• If not as specified, replace the seat belt.
End Of Sie
SEAT BELT
A6E775057000W01
YMU811WB0
S
YMU811WA4
YMU811WA6
S–103