Mazda 6 2002 Workshop Manual page 784

Hide thumbs Also See for 6 2002:

Table of Contents

4. If installing reused glass, install pins at the

ceramic void on the upper part of the windshield.

5. If installing reused glass, align the front

windshield molding marking and the center of the

upper section of the windshield, then install the

molding to the winshield.

6. Use only glass primer on the glass, and body

primer on the body and the molding. Allow it to

dry for approimately 30 minutes.

• • • • Keep the area free of dirt and grease, and

do not touch the surface or the primer

may not properly bond to the surface of

the glass and body, which may cause leaks to occur.

7. Apply urethane to the area of the glass surface as

shown in the figure.

8. Set the the windshield in place and insert the pins

into the body. Install the windshield.

WINDOW GLASS

Chapters

Table of Contents