Trunk Side Upper Trim Removal/Installation; Trunk Lid Trim Removal/Installation; Trunk End Trim Removal/Installation - Mazda 6 2002 Workshop Manual

Hide thumbs Also See for 6 2002:

Table of Contents

TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (LH only)

2. Remove the tire house trim.

3. Remove the rear seat remote lever.

4. Remove the screw.

5. Pull the trunk side upper trim toward you, then

disengage clips A from the body.

6. Disconnect the cargo compartment light

connector. (LH only)

7. Install in the reverse order of removal.

1. Pull the handle toward you, then remove the

2. Remove the fasteners, then remove the trunk lid

3. Install in the reverse order of removal.

1. Remove the fasteners.

2. Pull the trunk end trim upward, then disengage

clips A, pins B, and hooks.

3. Remove the trunk end trim.

4. Install in the reverse order of removal.

A6E774468860W02

A6E774458800W01

A6E774468890W01

Table of Contents