Dashboard And Console - Mazda 6 2002 Workshop Manual

DASHBOARD REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the glove compartment.
3. Remove the console.
4. Remove the meter hood.
5. Remove the instrument cluster.
6. Remove the column cover.
7. Remove the lower panel.
8. Remove the steering shaft.
9. Remove the A-pillar trims.
10. Remove the front scuff plates.
11. Remove the front side trims.
12. Remove the side panels.
13. For vehicles equipped with the wire-type climate control unit, disconnect the wires for the front A/C unit. (See to
U–44 CLIMATE CONTROL UNIT
14. Disconnect the dashboard harness connectors.
15. Remove the bolts.
Warning
• • • • Removing the dashboard without
supporting it can be dangerous. The
dashboard may fall and injure you.
Always perform these procedures
together with at least another person.
16. Pull out the support pins from the body to remove
the dashboard.
17. Take the dashboard off from the driver-side door
opening.
18. Install in the reverse order of removal.
End Of Sie
S–82

DASHBOARD AND CONSOLE

DASHBOARD AND CONSOLE
REMOVAL.) (See to U–45 CLIMATE CONTROL UNIT
A6E774255100W01
INSTALLATION.)
A6E7742W004
A6E7742W005