Solenoid Valve Removal/Installation - Mazda 6 2002 Workshop Manual

Pressure control solenoid
Resistance
2.4—7.3 ohms
(ATF temperature: –40—150 ° ° ° ° C {–40—302
° ° ° ° F})
Shift solenoid A, B, C
Resistance
1.0—4.2 ohms
(ATF temperature: –40—150 ° ° ° ° C {–40—302
° ° ° ° F})
Shift solenoid D, E
Resistance
10.9—26.2 ohms
(ATF temperature: –40—150 ° ° ° ° C {–40—302
° ° ° ° F})
End Of Sie

SOLENOID VALVE REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Remove the control valve body. (See
4. Remove the solenoid valve(s).
5. Apply ATF to a new O-ring and install it on the
solenoid valve.
K–28
AUTOMATIC TRANSAXLE
K–34 CONTROL VALVE BODY REMOVAL.)
A6E5614W041
A6E5614W042
A6E5614W043
A6E561421280W02
A6E5614W044