10. Remove the epansion valve. Do not allow
compressor oil to spill.
11. Install in the reverse order of removal.
12. Perform the refrigerant system performance test.
(See
U13 REFRIGERANT SYSTEM
PERFORMANCE
TEST.)
End Of Sie
EVAPORATOR INSPECTION
1. Remove the A/C unit. (See
2. Remove the evaporator from the A/C unit.
3. Inspect for cracks, damage, and oil leakage.
• If any problems are found, replace the evaporator.
4. Inspect for bent fins.
• If any are bent, use a flathead screwdriver to straighten them.
End Of Sie
U22
BASIC SYSTEM
U15 A/C UNIT
REMOVAL/INSTALLATION.)
A6E8516W010
A6E8516W022
A6E851661810W01