Mazda 6 2002 Workshop Manual page 803

CENTER BOX REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the center panel module.
3. Remove the screws.
4. Pull the center bo forward, then disengage the
tabs
5. Disconnect the LDC unit connector.
6. Install in the reverse order of removal.
End Of Sie
GLOVE COMPARTMENT REMOVAL/INSTALLATION
1. Pull the stay damper to the direction shown in the
figure. Then detach the fit for the glove
compartment from the stay damper.
2. Bend the stoppers inward to remove.
3. Turn the glove compartment downward and pull
the clips to remove it.
4. Install in the reverse order of removal.
End Of Sie
DASHBOARD AND CONSOLE
A6E774264030W01
A6E7742W012
A6E774264030W02
S
A6E7742W006
A6E7742W007
S–85