Mazda 6 2002 Workshop Manual page 1118

Hide thumbs Also See for 6 2002:

Table of Contents

Refrigerant Lines Removal Note

Nut joint type

1. Loosen the nut using two spanners, then remove the cooler pipe or hose.

Block joint type

1. Disconnect the block joint type pipes by grasping female side of the block with pliers or similar tool and holding

firmly, then remove the connection bolt or nut.

Spring-lock coupling type

1. Set the SST.

2. While looking through the inspection hole of the

SST, insert the protruding part of the SST until it

makes contact with the cage section.

3. Use the SST to disconnect the male pipe or hose

from the female by pulling the male pipe or hose.

• The male pipe or hose can be disconnected

easily from the female pipe by pulling from

the male pipe or hose while maintaining the

pressure of the protruding part of the SST.

BASIC SYSTEM

Chapters

Table of Contents