Caliper (Front) - Mazda 6 2002 Workshop Manual

FRONT BRAKE (DISC) REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. After installation, depress the pedal a few times, rotate the wheel by hand, and verify that the brake does not
drag.
.
1 Fleible hose
2 Cap
3 Guide pin
4 Caliper
5 M-spring
Disc Plate Removal Note
1. Mark the wheel hub bolt and disc plate before
removal for reference during installation.
Disc Plate Installation Note
1. Remove any rust or grime on the contact face of the disc plate and wheel hub.
2. Install the disc plate and align the marks made before removal.
P–20
CONVENTIONAL BRAKE SYSTEM
6 Disc pad
(See P–21 Disc Pad Installation
7 Guide plate
8 Mounting support
9 Disc plate
(See P–20 Disc Plate Removal
(See P–20 Disc Plate Installation
A6E691233980W02
A6E6912W021
Note)
Note)
Note)
A6E6912W037