Mazda 6 2002 Workshop Manual page 712

Bolt (Rear Shock Absorber Lower Side) Removal Note
1. Support the trailing link with a jack.
Caution
• • • • Removing the trailing link is dangerous.
The trailing link could fall and cause
serious injury or death. Verify that the
jack securely supports the trailing link.
End Of Sie
REAR STABILIZER REMOVAL/INSTALLATION
1. Remove the rear auto leveling sensor.
(See T–32 REAR AUTO LEVELING SENSOR
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
4. Adjust the headlight zeroset.
(See T–31 HEADLIGHT
.
1 Stabilizer control link
2 Stabilizer bracket
End Of Sie
R–34
REAR SUSPENSION
REMOVAL/INSTALLATION.)
ZEROSET.)
3 Bushing
4 Rear stabilizer
A6E7416W005
A6E741628100W01
A6E7416W004