Window Glass; Windshield Removal - Mazda 6 2002 Workshop Manual

Hide thumbs Also See for 6 2002:

Table of Contents

1. Remove the rearview mirror.

2. Remove the cowl grille.

3. Remove the headliner.

4. Apply protective tape along the edge of the body to protect it from damage.

5. Apply protective tape to the dashboard to protect it from damage.

6. Cut the lip of the windshield molding using a

• • • • Using a razor with bare hands can cause

injury. Always wear gloves when using a

• The windshield molding is a replacement

Not Reusing Windshield

1. Remove the base.

• For the areas of the sealant that are difficult to cut, use a SST (piano wire) and follow the procedure under

“Reusing Windshield.”

2. Use a SST, and insert the blade into the sealant.

3. Pull through the sealant around the edge of the

4. Remove the winshield.

Reusing Windshield

• Before removing the windshield from the body, mark the position of the windshield by affiing tape to the

windshield and body panel.

1. Make a hole through the sealant, avoiding pins,

from the inside of the vehicle using an awl.

WINDOW GLASS

A6E773863900W01

Table of Contents