Mazda 6 2002 Workshop Manual page 30

Hide thumbs Also See for 6 2002:

Table of Contents

1. Remove the towing eyelet and the lug wrench from the trunk.

2. Wrap a screwdriver or similar tool with a soft cloth to prevent damage to the painted bumper and open the cap

located on the front bumper, below the left headlight.

• • • • The cap cannot be completely removed.

Do not use ecessive force as it may

damage the cap or scratch the painted

bumper surface.

3. Securely install the towing eyelet using the lug

4. Hook the towing rope to the towing eyelet.

• • • • If the towing eyelet is not securely

tightened, it may loosen or disengage

from the bumper when towing the

vehicle. Make sure that the towing eyelet

is securely tightened to the bumper.

Chapters

Table of Contents