Oil Pump; Oil Pump Removal/Installation - Mazda 6 2002 Workshop Manual

OIL PUMP REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Drain the engine oil. (See
3. Remove the oil pan. (See
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
6. Inspect the engine oil level. (See
7. Start the engine and inspect for oil leakage.
• If the oil leaks, specify the faulty part and repair or replace it.
8. Inspect the oil pressure. (See
.
1 Oil strainer
2 Oil pump chain guide
3 Oil pump chain tensioner
4 Oil pump chain tensioner spring
D–10

OIL PUMP

OIL PUMP
D–4 ENGINE OIL REPLACEMENT.)
D–8 OIL PAN REMOVAL/INSTALLATION.)
D–4 ENGINE OIL
D–3 OIL PRESSURE
INSPECTION.)
INSPECTION.)
5 Oil pump chain
6 Oil pump sprocket
(See D–11 Oil Pump Sprocket Removal /
Installation Note)
7 Oil pump
A6E332214100W01
AME3322W001