OIL PAN, OIL PUMP
Steps After Installation
Install the engine assembly. (Refer to Section B3.)
Note
Be sure to install and tighten the transmission oil pan bolts.
Tightening torque:
38-51
N-m (3.8-5.2
kgf-m, 28--38 ft-lbf)
Be sure to tighten the oil pan bolts and nuts.
Tightening torque:
7-10
N.m (0.69-4.96 kgfem, 5-7
ft.lbf}
OIL PUMP
REMOVAL I INSTALLATION
Refer to page D3-8.
DISASSEMBLY I ASSEMBLY
1.
Disassemble in the order shown in the figure.
2. Assemble in the reverse order of disassembly, referring to Assembly Note.
MD1049-A
1. Cover
4.
Plug
2. Rotor and shaft
5. Spring
Inspection
.................................
Section D l
6. Plunger
Assembly Note
.....................
page D3-12
3.
Outer race
Assembly Note
.....................
page D3-12
pl